The forklift truck can be incorporated into an optionally available warehouse navigation system. The combination of the optional fork camera the crossline laser, which is also available as an option, is a great help to the operator: The laser helps to pick up the pallet precisely and the fork camera provides optimal visibility of the load when storing in high racking levels and ensures higher handling performance. At the push of a button, the truck autonomously performs three movements when storing or retrieving a pallet. In addition, there are several assistance and camera systems for handling at great heights, e.g. Personnel safety equipment (PSE), which is also available as an option, uses sensors installed on the front and rear to determine whether persons or objects are in the line of travel, and stop the truck.Įven at extreme lift heights, the turret truck can achieve high speeds thanks to its drive technology. The aisle safety assistant, which is available as an optional extra, uses RFID tags or barcodes to determine its horizontal position in the aisle, and then reacts to uneven floors or obstacles on the rack or ceiling and adjusts the lift height and speed accordingly. This prevents accidental lifting or lowering of the load during driving. In addition, a service technician can program driving, lifting, and lowering end stops. These functions increase safety and handling performance. The optional Dynamic Reach Control (DRC) intelligently adjusts the reach according to the current load weight, and eliminates lateral mast oscillations when storing and retrieving loads. The systems make it easier to handle loads at higher rack levels and reduce the risk of accidents. The optional fork camera and crossline laser gives the driver improved visibility of the load at great heights. The Crown TSP 6500 utilizes 48V batteries, while the Crown TSP 7000 utilizes 80V and 72V batteries.Side seated operation gives the operator optimum visibility when driving forwards and reversing. The truck uses some of the largest batteries available to provide up to 50 percent more power for truck performance and battery life. This regenerative technology, combined with the option to use a larger battery, can help users save energy and improve run time by 25 percent or more depending on the application. A cold storage cabin can also be affixed to the truck, allowing the operator to work in temperatures as low as - 40F.įinally, the Crown TSP Series features regenerative braking and lowering systems that capture lost energy and return it to the battery. The truck has a fully adjustable "MoveControl Seat" with integrated, intuitive controls built into the armrests. This design feature reduces twisting and swaying, providing greater stability and allowing the truck to reach higher heights, according to Crown. The trucks feature Crown's MonoLift mast, which has a boxed-in cross section construction. The Crown TSP 6500 can reach a total of 531 inches. The Crown TSP 7000 Series turret truck can reach a total of 675 inches, or six stories, and deliver most loads to full height. The Crown TSP Series can also place most loads at any height and/or at any open slot, while traveling in a tight aisle with less than six inches of clearance, according to Crown. Additionally it can complete a full traverse in only five seconds and pivot a full 180 degrees in six seconds. It also delivers a 25-percent increase in travel speed compared to traditional trucks. The turret truck features a main lift speed of 120 feet per minute-a 41-percent improvement over conventional trucks, according to Crown. According to Crown, these lift trucks offer fast lift speeds, high reach, and a high level of operator control and comfort.Ĭrown says that the TSP Series Turret Trucks provide faster lift, travel, pivot, and traverse speeds than conventional trucks. has introduced the Crown TSP 7000 and TSP 6500 Series Turret Trucks.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |